Recording Discs-Disc Synchronized Recording - JVC FS-G2 Instructions Manual

Recording Discs
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
• See also page 15.
2
Close the cassette holder gently.
3
Press CD 3/8 to select the CD
player as the source.
4
Press 7 to stop the disc playback.
• If you want to start recording from a
particular track, select the beginning track
using UP ¢ or DOWN 4, then go to the next step.
• If you want to make a program, perform steps 2 to 4 on
page 13. After making a program, go to the next step.
5
Press ‡ (recording).
The REC indicator appears on the display and
the CD starts playback automatically and the
recording starts.
• When the end of the tape is reached, recording stops and
the CD player is paused.
• If you press ‡ (recording) while playing back the CD, the
CD player returns to the beginning of that track and the
track is recorded on the tape.
CD
#/8
7
REC
You cannot press ‡ (recording) in the following cases:
• If no cassette is inserted.
• If a protected cassette is inserted.
To stop recording for a moment, press *.
The recording is paused, but the CD playback
does not stop.
To resume recording, press * again.
To stop recording, press &/).
The recording stops and the CD playback is
paused.
To remove the cassette, press &/) while
recording is stopped.
18