Using The Sleep Timer - JVC FS-G2 Instructions Manual

Compact component system consists of ca-fsg2 and sp-fsg2
Hide thumbs Also See for FS-G2:
Table of Contents

Advertisement

Using the Timers
To deactivate the timer temporarily,
Press TIMER on the unit repeatedly until the
indicator goes off.
To change the Daily Timer to use,
Press TIMER on the unit repeatedly until the timer number
indicator you want begins to flash.
The timer is activated after a few seconds and the selected
timer number remains lit.
• To change the timer setting, repeat steps 1 to 7 on page 19.
If the unit is already turned on when the timer on-time
comes
The timer does not work.
When you unplug the AC power cord or if a power
failure occurs
The timer setting remains. Set the built-in clock and activate the
timer again.
20
(continued)

Using the Sleep Timer

(timer)
With the Sleep Timer, you can fall asleep to your favorite
music or radio program.
• You can set the Sleep Timer only when the unit is turned
on.
How the Sleep Timer actually works
The unit automatically turns off after the specified length of
time passes.
On the remote control ONLY:
1
Press SLEEP.
The SLEEP indicator flashes on the display.
• Each time you press the button, the length of time
2
Wait for about 5 seconds after specifying the
length of time.
The SLEEP indicator remains lit on the display.
To check the remaining time until shut-off time, press
SLEEP once. The remaining time until shut-off time appeears
for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the length of time you want appears.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off and display returns to the normal
indication.
• Turning off the unit also cancels the Sleep Timer.
The unit follows the Sleep Timer setting.
Do not shut the unit off with the Sleep Timer while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.
SLEEP
changes as follows:
10
20
Normal indication
(canceled)
When you set the Sleep Timer after the Daily Timer
starts playing the selected source
If you set the Sleep Timer while playing back or
recording a tape
SLEEP
30
60
120
90

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-g2jCa-fsg2Sp-fsg2

Table of Contents