Safety Considerations; Application Purpose; Hazard Definitions; Observe The Following Symbols - Buderus Logamax plus GB162-80 kW Replacement Instructions Manual

For gas valve replacement
Hide thumbs Also See for Logamax plus GB162-80 kW:
Table of Contents

Advertisement

1

Safety considerations

For use in Canada the gas valve replacement shall be
carried out in accordance with the requirements of the
provincial authorities having jurisdiction and in
accordance with the requirements of the CAN-B149.1
and CAN1-B149.2 Installation Code. See also E.I.V.
Please observe the following safety instructions.
1.1

Application purpose

This document describes how to replace the gas valve for
the Logamax plus GB162-80 kW/100 kW.
1.2

Hazard definitions

The following defined terms are used throughout the
documentation to bring attention to the presence of
hazards of various risk levels. Notices give important
information concerning the operation of the product.
DANGER:
Indicates the presence of hazards that will
cause severe personal injury, death or
substantial property damage.
WARNING:
Indicates the presence of hazards that can
cause severe personal injury, death or
substantial property damage.
CAUTION:
Indicates presence of hazards that will or
cause minor personal injury or property
damage.
CAUTION:
Risk of electric shock.
Indicates presence of hazards due to electric
shock.
Indicates special instructions on installation,
operation or maintenance that are important
but not related to personal injury or property
damage.
Logamax plus GB162-80 kW/100 kW - We reserve the right to make any changes due to technical modifications!
Safety considerations
1.3

Observe the following symbols

DANGER:
due to explosion of gas.
B Work only on gas components when you
have a license to do so.
B Note that the assembly of gas and vent
connections, the initial start-up, the
electrical connections, the maintenance
and service can only be performed by a
licensed service contractor or technican.
DANGER:
due to electricity.
B Prior to doing any work on the heating
system, disconnect all electrical power to
the appliance at the emergency switch.
B It is NOT sufficient to shut off only the
appliance control!
1
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents