Table of Contents
Advertisement
Installation of Indoor, Outdoor Unit
Read completely, then follow step by step.
Select the best location
Indoor unit
1. Do not have any heat or steam near the unit.
2. Select a place where there are no obstacles
in front of the unit.
3. Make sure that condensation drainage can be
conveniently routed away.
4. Do not install near a doorway.
5. Ensure the spaces indicated by arrows from
the wall, ceiling, fence or other obstacles.
6. Use a stud finder to locate studs to prevent
unnecessary damage to the wall.
CAUTION: Install the indoor unit
on the wall where the height from
the floors more than 2.3m(7.5ft).
Outdoor unit
1. If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
2. Ensure that the spaces indicated by arrows
around front, back and side of the unit.
3. Do not place animals and plants in the path
of the warm air.
4. Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
5. Select a place so that the warm air and sound
from the air conditioner do not disturb
neighbors.
Rooftop Installations:
If the outdoor unit is installed on a roof
structure, be sure to level the unit. Ensure the
roof structure and anchoring method are
adequate for the unit location. Consult local
codes regarding rooftop mounting.
Installation of Indoor, Outdoor Unit
More than 5cm
(2.0 inch)
More than 2.3m
(90.6 inch)
more than 30cm
(11.8 inch)
more than 70cm
(27.6 inch)
More than 5cm
(2.0 inch)
More than 5cm
(2.0 inch)
more than 30cm
(11.8 inch)
Installation Manual 7
Advertisement
Table of Contents
