Audio; Others - JVC DD-1 Instructions Manual

AUDIO

? ?
Items
Contents (
DIGITAL Select the output signal type suitable to
AUDIO the device connected to the [LINE-DIGI-
OUTPUT TAL OUT] terminal. Refer to "List of rela-
tionships of DIGITAL AUDIO OUTPUT
preference items and output signal" on
page 41.
PCM ONLY :
Device corresponding only to linear PCM.
DOLBY DIGITAL/PCM :
Dolby Digital decoder or device having
the same function.
STREAM/PCM
DTS/Dolby Digital decoder or device hav-
ing the same function.
DOWN MIX Select the signal suitable to the device
connected to the [LINE-DIGITAL OUT]
terminal. Set "DOWN MIX" only when
"DIGITAL AUDIO OUTPUT" is set to
"PCM ONLY".
DOLBY SURROUND :
Dolby Pro Logic decoder-built-in device.
STEREO
:
Ordinary audio device.
D (Dynamic). To correct the difference between high
RANGE volume and low volume when playing
COMPRESSION back with low volume (only for a DVD
recorded with Dolby Digital).
WIDE RANGE :
For enjoying the original full dynamic
range of surround sound without effects.
NORMAL :
For normal usage. Surround sound is
compressed to a certain level.
HDMI You can select whether or not the audio
AUDIO OUT signal from the [HDMI] terminal is output.
ON :
The audio signal from the [HDMI] is out-
put.
OFF :
The audio signal from the [HDMI] is not
output.
NOTE
• Depending on the connected TV, when
"HDMI AUDIO OUT" is set to "ON",
only PCM signals can be output via an
HDMI cable.
: initial setting)
:

OTHERS

? ?
Items
Contents (
RESUME
Select or OFF. (Refer to page 28.)
ON
ON
Select ON or OFF. (Refer to page 27.)
SCREEN
GUIDE
DivX The main unit has its own registration
REGISTRA- code. You can confirm the registration
TION code, when necessary. Once you have
played back a disc/file on which the regis-
tration code is recorded, the registration
code of the main unit is overwritten for
copyright protection.
NETWORK For DD-8/DD-3 users:
SETUP Refer to the separate volume of the oper-
ation manual for the network function.
For DD-1 users:
This item is not available.
: initial setting)
40