Ford Windstar User Manual page 184

Roadside emergencies
The pull fuse is located under the instrument panel and is visible from
the exterior of the fuse panel cover.
The fuse holder is designed to allow you to pull the fuse (#6) from the
fuse panel circuit without having to completely remove it from the fuse
panel. The fuse and fuse holder will remain in the fuse panel.
If the fuse (#6) must be replaced, the fuse and fuse holder can be
removed by pulling it completely out from the fuse panel cover.
With the fuse (#6) removed, the following systems will not be functional:
• radio
• power sliding door(s) – (if equipped)
• keyless entry system– (if equipped)
When the pull fuse is reinstalled, the following features will need to be
reset.
• radio pre-sets
• power sliding door(s) – (if equipped)
Please refer to the Using Your Audio System and Power Sliding Door
sections in the Controls and Features chapter for instructions to reset
these features.
184