Raymarine i60 Installation And Operation Instructions Manual page 23

• Use your SeaTalk ng backbone and connect each NMEA2000
device on a spur, OR
• connect the instrument display on a spur into an existing
NMEA2000 backbone.
Important: You cannot have any 2 terminated backbones
connected together, unless you have an isolation gateway
between the two backbones.
Connecting NMEA2000 equipment to the SeaTalk
backbone
1
12V
2
1. 12 V dc power supply into backbone.
2. SeaTalk ng backbone.
3. SeaTalk ng to DeviceNet adaptor cable.
4. NMEA2000 equipment.
Connecting the unit to an existing NMEA2000 (DeviceNet)
backbone
2
1. SeaTalk ng instrument display
2. SeaTalk ng to DeviceNet adaptor cable.
3. DeviceNet backbone.
4. NMEA2000 equipment.
Cables and connections
ng
4
NM EA 2000
3
SeaT alk ng
D12380-1
1
4
3
D12377-1
23