9-10) Component Load Operation Function - Samsung RB2044SL Service Manual

Operation Function
Table 1. Display table of self diagnosis.
No Item
1
R-sensor
R-defroster
2
sensor
Outer sensor
3
F-sensor
4
F-defroster
5
sensor

9-10) Component Load Operation Function

1) In the normal operation, press Power Freeze and Power Cool buttons simultaneously for 3 second,
then the display panel will blink for 2 seconds.
2) Press Refrigerator Temp. button to get into this check mode with an audible tone.
3) Each illuminating LED segment stands for the component which has an ouput signal from the control
board.
4) This mode will terminate automatically after 30 seconds.
LED Display
REFRIGERATOR
• Connector contact failure
• Short-circuit
REFRIGERATOR
• Connector contact failure
• Short-circuit
FREEZER
• Connector contact failure
• Short-circuit
FREEZER
• Connector contact failure
• Short-circuit
FREEZER
• Connector contact failure
• Short-circuit
Details
24
Remarks
-58℉
•Suspected to be below
150℉
•Suspected to be over
-58℉
•Suspected to be below
150℉
•Suspected to be over
-58℉
•Suspected to be below
150℉
•Suspected to be over
-58℉
•Suspected to be below
150℉
•Suspected to be over
-58℉
•Suspected to be below
150℉
•Suspected to be over