Removal Procedure Of Indoor Unit - York DCPM Technical Manual

923180-UTG-A-1112
REMOVAL PROCEDURE

Removal Procedure of Indoor Unit

Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly.
STEPS
1. Before disassembly of the unit
2. Remove filter
3. Remove display
34
Axonometric drawing for the
complete unit.
panel
a. Open the panel.
b. Loosen the clasps
on the filter.
c. Draw out two
pieces of filter.
filter
Remove 2 screws fixing display,
and then remove the filter.
PROCEDURES
clasps
Johnson Controls Unitary Products
Display