Pilot Control Shut-Off Lever; Engine Stop Switch - Hitachi ZAXIS 120-3 class Operator's Manual

Table of Contents

PILOT CONTROL SHUT-OFF LEVER

Pilot control shut-off lever (1) functions to prevent the machine

from being mistakenly operated when the operator is getting

on or off the machine.

• Pilot control will not be shut-off unless pilot con-

trol shut-off lever (1) is completely pulled-up to the

LOCK position.

• Before leaving the operator's seat, always stop the

engine and pull pilot control shut-off lever (1) up

to the LOCK position.

• Also, pull pilot control shut-off lever (1) up to the

LOCK position when transporting the machine or

when the day's work is complete.

• Confirm that pilot control shut-off lever (1) is in the

LOCK position before starting the engine.

In case the engine does not stop even if the key switch is

turned OFF due to failure of the machine, move engine stop

switch (2) located at the front-left side of the seat stand down-

ward to stop the engine. After operating switch (2), be sure to

return switch (2) back to the upward position.

OPERATOR'S STATION

LOCK Position

UNLOCK Position