Hitachi ZAXIS 120-3 class Operator's Manual page 237

Table of Contents

Draining Procedures (Pre-Filter)

1. Place 0.5 liters or larger capacity container under drain

hose (6) to collect the drained water.

2. Rotate drain plug (5) on the bottom of the filter coun-

terclockwise. Drain the water accumulated in the filter

until float (8) goes to the bottom of case. If it is difficult to

drain, loosen plug (7) on the top of the fuel pre-filter.

3. After draining water, securely tighten drain plug (5) and

4. Start the engine. Check drain plug (5) and plug (7) for fuel

IMPORTANT: After draining water mixed in fuel, bleed air

from the fuel supply system.

Wrench size: 14 mm

ZX120-3 Class

ZX180-3 Class

ZX200-3, 270-3 Class

ZX330-3 Class