Table of Contents
Advertisement
Connecting Other Equipment
You can connect both analog and digital equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect analog components
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
To audio output
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and the AUX IN jacks by using an audio cord (not
supplied).
To audio input
For recording sounds through this unit on the other
equipment, connect between the audio input jacks on the
other equipment and the LINE OUT jacks by using an audio
cord (not supplied).
• See "About sounds reproduced through the rear terminals"
on the right column.
AUX IN
Audio equipment
LINE OUT
Audio equipment
– 8 –
To connect audio equipment with an optical digital
input terminal — such as digital decoder
You can connect a digital decoder or MD recorder by using
an optical digital cord (not supplied).
• See "About sounds reproduced through the rear terminals"
below.
DIGITAL OUT
[
OPTICAL
]
To optical
digital input
Audio equipment
with an optical digital
input
About sounds reproduced through the rear
terminals
• Through the LINE OUT (L/R) jacks and MAIN
SPEAKERS/SUBWOOFER terminals:
Analog stereo signals are output.
When playing a source encoded with Dolby Digital*
(
) or with MPEG Multichannel, multichannel
signals are mixed to the left and right front channel
signals, then output.
– You cannot reproduce the sound encoded DTS Digital
Surround** (
).
• Through the DIGITAL OUT (OPTICAL) terminal:
Digital signals (Linear PCM, Dolby Digital, DTS
Digital Surround, MPEG Multichannel) are output
through this terminal.
To reproduce the multichannel sounds such as Dolby
Digital, MPEG Multichannel, and DTS Digital
Surround, connect an amplifier or a decoder compatible
with these multichannel sources to this terminal, and set
"DIGITAL OUTPUT" and "DTS" settings correctly.
(See page 31.)
* Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories. All rights reserved.
** Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. "DTS" is a registered trademark of
Digital Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All Rights Reserved.
Continued
Protective
plug
Before connecting
the other equipment,
remove the
protective plug from
the terminal.
Advertisement
Table of Contents
