Standard Specifications - IBM System x3630 M4 Product Manual

Standard specifications

The following table lists the standard specifications.
Table 1. Standard specifications (part 1)
Components Specification
Form factor 2U rack.
Processor Up to two Intel Xeon processor E5-2400 product family processors with eight cores (up to 2.3
GHz), six cores (up to 2.4 GHz) or four cores (up to 2.2 GHz), one QPI link up to 8.0 GTps,
up to 1600 MHz memory speed, up to 20 MB L3 cache; or
one Intel Xeon processor E5-1400 product family processor with four cores up to 2.8 GHz, 10
MB L3 cache, and 1333 MHz memory speed (CTO only); or
one Intel Pentium processor 1400 product family processor with two cores up to 2.8 GHz, 5
MB L3 cache, and 1066 MHz memory speed (CTO only).
Chipset Intel C600 series.
Memory Up to 12 DIMM sockets (six DIMMs per processor). LRDIMMs, RDIMMs, and UDIMMs are
supported, but memory types cannot be intermixed. DIMM speeds are up to 1600 MHz.
Memory With LRDIMMs: Up to 384 GB with 12x 32 GB RDIMMs and two processors
maximums With RDIMMs: Up to 192 GB with 12x 16 GB RDIMMs and two processors
With UDIMMs: Up to 48 GB with 12x 4 GB UDIMMs and two processors
Memory protection ECC, Chipkill, memory mirroring, and memory rank sparing.
Disk drive bays Up to eight 3.5-inch SATA simple-swap drive bays, up to eight 3.5-inch SAS/SATA hot-swap
drive bays, or up to fourteen 3.5-inch SAS/SATA hot-swap drive bays.
Maximum internal Up to 56 TB with 4 TB 3.5-inch NL SAS/SATA HS HDDs, up to 32 TB with 4 TB 3.5-inch
storage SATA SS HDDs, or up to 11.2 TB with 800 GB 3.5-inch SATA HS SSDs. An intermix of
SAS/SATA is supported.
RAID support RAID 0 and 1 with C105. RAID 0, 1, and 10 with M1115 or M5110. Upgrades to RAID 5 and
50 are available for M1115. Upgrades to RAID 5 and 50 are available for M5110
(zero-cache; 512 MB battery-backed cache; 512 MB or 1 GB flash-backed cache). Upgrade
to RAID 6 or 60 is available for M5110 with caches.
Optical drive bays One, for models with up to eight 3.5-inch drive bays. Support for optional DVD-ROM or
multiburner.
Tape drive bays Optional, for models with up to eight 3.5-inch drive bays. Tape Enablement Kit is required to
support the internal tape drive. Support for optional DDS5 or DDS6 USB tape drives is
available.
Network interfaces Up to four integrated Gigabit Ethernet 1000BASE-T RJ-45 ports (two ports enabled, and an
additional two ports require the optional software FoD upgrade to enable them).
Ports Two USB 2.0 and one DB-15 video (not available on storage-rich models) port on the front.
Four USB 2.0, one DB-15 video, one DB-9 serial, and four RJ-45 GbE network ports on the
rear. Two internal USB ports (one for embedded hypervisor, one for internal USB tape drive).
Cooling IBM Calibrated Vectored Cooling with three redundant non-hot-swap fans; each fan has two
motors.
Power supply Up to two redundant hot-swap 550 W HE AC, 750 W HE AC, or 900 W HE AC power supplies
(all AC power supplies are 80 PLUS Platinum certified), or up to two redundant hot-swap 750
W HE DC power supplies.
Hot-swap parts Hard drives (hot-swap models), power supplies.
IBM System x3630 M4 (E5-2400) 7