Table of Contents
Advertisement
12
Getting started
121
Set-up
Removing or installing the back cover
Installing or removing the battery
Please power off your phone before removing the battery.
•
Insert and click the battery into place, then close the phone cover.
•
Unclip the cover, then remove the battery.
Installing or removing the microSD card
9
Insert the microSD card with golden contact facing downwards into the slot. To remove the
microSD card, gently press and slide it out.
To avoid data loss and SD card damage, before removing , please ensure that the
SD card is unmounted (Settings\Storage\Unmount SD card).
Charging the battery
Connect the battery charger to your phone and AC outlet respectively.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before connecting the charger.
•
The AC outlet must be near to the phone and easily accessible (avoid electric extension
cables).
•
When using your telephone for the first time, charge the battery fully (approximately
4 hours).
You are advised to fully charge the battery (
of water while the phone is powered off. The depth increases as the phone is charged.
To reduce power consumption and energy waste, when battery is fully charged,
disconnect your charger; switch off Wi-Fi, GPS, Bluetooth or background-running
applications when not in use; reduce the backlight time, etc.
). Charging status is indicated by the depth
10
Advertisement
Table of Contents
