Programming The Playing Order Of The Tracks - Program Play; Playing At Random - Random Play - JVC A-UXP38V Instructions Manual

Programming the Playing Order of the Tracks —
Program Play
You can arrange the order in which tracks play before you start
playing. You can program up to 50 tracks.
On the remote control ONLY:
1
Load a CD.
• If the current playing source is not the CD player, press
SELECT CD 3/8, then 7 button before going to the next
step.
2
Press PROG (program).
The PRGM (program) indicator lights up on
the display.
PRGM
3
Press MULTI KEY > or MULTI KEY < to
select the track number, then press SET.
Track number
4
Repeat step 3 to program other tracks you
want.
5
Press SELECT CD 3/8.
The tracks are played in the order you have
programed.
To stop playing, press 7.
To exit from Program mode, press PROG button (during CD
stop mode). The PRGM indicator goes off. All the programed
tracks will be cleared.
Program step number
– 13 –
To check the program contents
You can check the program contents on the display by pressing
PREV 4 or ¢ NEXT under stop condition. The programed
tracks are shown in the programed order.
To modify the program
Before or after playing, you can erase the last
programed track by pressing CANCEL on the
remote control.
• Each time you press the button, the last programed track is
erased from the program.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
• If you try to program the 51st track
"FULL" will appear on the display.
Playing at Random — Random Play
The tracks will play in no particular order when you use this
mode.
On the remote control ONLY:
To use Random play mode, press RANDOM
before play.
The RANDOM indicator lights up on the display.
The tracks are played at random.
Random play ends when all the tracks are played once.
To skip the current track, press NEXT ¢ or MULTI KEY >.
• You cannot go back to the previous track by pressing
PREV 4 or MULTI KEY <.
To stop playing, press 7.
• Random play mode is also canceled.
To exit from Random play mode, press RANDOM again
before play. Random play mode is canceled and Normal play
resumes.
Continued