JVC RX-D411S Instructions Manual page 53

To change the transmittable signals for operating a STB
1
Press and hold STB
• Keep the button pressed until step
2
Press STB CONT.
3
Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See "Manufacturer codes for STB" below.
4
Release STB .
Now, you can perform the following operation on the STB:
STB : Turn on or off the STB.
After pressing STB CONT, you can perform the following
operations on the STB.
CHANNEL +/–: Change the channel numbers on the
STB.
1 – 9, 0, h10:
Select the channel numbers on the
STB.
See the instructions supplied with the STB for details.
5
Try to operate your STB by pressing STB
.
When your STB turns on or off, you have entered the
correct code.
If more than one code is listed for your brand of STB, try
each one until the correct one is entered.
Manufacturer codes for STB
Manufacturer
JVC 01, 02
Amstrad 03, 04, 05, 06, 31
BT 01
Canal Satellite 20
Canal+ 20
D-Box 24
Echostar 17, 18, 19, 21
Finlux 11
Force 28
Galaxis 27
Grundig 07, 08
Hirschmann 07, 17, 37
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 34
Luxor 11
Mascom 32
Maspro 13
Nokia 24, 26, 33
Pace 10, 25, 31
Panasonic 15
Philips 09, 23
RFT 12
Saba 35
Sagem 22, 29
Salora 11
Selector 29
Skymaster 12, 36
Thomson 35
TPS 22
Triax 30
Wisi 07
Initial setting: 01
.
3
is finished.
Codes
To change the transmittable signals for operating a DVD
player
1
Set the mode selector to "DVD."
2
Press and hold DVR/DVD
• Keep the button pressed until step
3
Press DVR/DVD.
4
Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See "Manufacturer codes for DVD player" below.
5
Release DVR/DVD
Now, you can perform the following operations on the
DVD player:
DVR/DVD : Turn on or off the DVD player.
3:
Start playback.
¢:
Skip to the beginning of the next
chapter (or fast-forward for some
models).
4:
Return to the beginning of the
current chapter (or fast-reverse for
some models).
7:
Stop playback.
8: Pause playback. To release it, press 3.
MENU: Display the menu recorded on DVD
VIDEO discs.
5/∞/3/2:
Select an item on the menu screen.
SET: Enter the selected item.
1 – 9, 0, h10:
Select the chapter number.
See the manual supplied with the DVD player for details.
6
Try to operate your DVD player by
pressing DVR/DVD
Your DVD player turns on or off when you have entered
the correct code.
Manufacturer codes for DVD player:
Manufacturer
JVC 01
Kenwood 02, 03
Mitsubishi 06
Panasonic 07
Philips 05
Pioneer 08
Sony 09
Toshiba 04
Yamaha 10
Initial setting: 01
NOTE
You cannot use this remote control to operate any manufacturers'
DVD recorders other than JVC's.
Manufacturer codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
.
4
is finished.
.
.
Codes
49