JVC RX-D411S Instructions Manual page 14

Do not connect the AC power cord until all other connections have been made.
7 SCART connection
You can enjoy pictures and sounds from playback components simply by connecting with the SCART cable.
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
Turn off all components before making connections.
• When you connect the components, refer also to their manuals.
SCART cable
(not supplied)
For an analog decoder
To watch through or to record a scrambled program on your VCR, connect the analog decoder to your VCR and select the
scrambled channel on your VCR.
If there is not an appropriate terminal for the decoder connection on your VCR, connect the decoder to your TV. Refer also to
the manuals supplied with these components.
For T-V LINK
• You can use the T-V LINK function if you connect a T-V LINK compatible TV and VCR to this receiver with a fully wired SCART
cables. For details on T-V LINK, refer also to the manuals supplied with the TV and the VCR.
• Connect a SCART cable to EXT-2 terminal on the JVC's T-V LINK compatible TV for the T-V LINK function.
• Some video components support the data communication like T-V LINK. For complete details, refer also to the manuals
supplied with these components.
NOTES
• To enjoy TV sound through this receiver or record a TV program with a DVD recorder or VCR connected to this receiver, connect your TV with
the SCART cable as well when connecting with the HDMI or component video cable. However, the input setting of the TV may change to
SCART input with some TVs or sources regardless of the video output setting (see page 34).
• Set the audio and video input setting appropriately (see page 21).
SCART Terminal Specifications
Audio L/R
Composite
Input
Video S-video (Y/C)
RGB
Audio L/R
Composite
Output
Video S-video (Y/C)
RGB
T-V LINK
(‡: Available, –: Not available)
10
Terminal name
TV VCR DVR/DVD
‡ ‡ ‡
‡ ‡ ‡
‡ ‡
–
‡ ‡
–
‡ ‡
–
‡* ‡* ‡*
1 1 1
‡
– –
‡
– –
‡* ‡* ‡*
2 2 2
SCART cables
(not supplied)
VCR
DVD recorder or DVD player
1
* The signals input from a SCART terminal cannot be output
through the same SCART terminal.
* 2 The signals for the T-V LINK function are always going
through the receiver.
NOTE
When you record a playback picture with a DVD recorder or VCR
connected to this receiver, perform either one of the below:
– Select a setting other than "S" for the video input setting (see page
21) to transmit composite video or RGB signals to this receiver.
– Select "OTHER" for the video output setting (see page 34) to
transmit S-video signals from a playback component to this
receiver.
TV