6.
Insert the drive tray and HDD assembly
all the way into the depth of the bay
until just a small fraction of the tray
edge protrudes.
When installed, the SATA/SAS connector on the drive connects to the SATA/SAS interface
on the backplane.
7.
Push the tray lever until it clicks and secures the drive tray in place.
The drive tray is correctly placed when its front edge aligns with the bay edge.
tray lever
8.
Repeat steps 1 to 7 to install the other SATA/SAS HDDs.
2-14
spring lock
Chapter 2: Hardware setup