Zoom R24 Operation Manual page 117

Effect types and parameters 2
Type
Position
Auto wah dependent on dynamics of input signal.
Depth
Tremolo
Periodically varies the volume level.
Position
Phaser
Produces a swooshing sound.
Position
Ring
Modulator
Produces a metallic ringing sound. Adjusting the Frequency parameter results in a drastic change of sound character.
Position
Slow Attack
Slows down the attack rate of the sound.
Position
Changes the wah frequency according to rhythm tempo.
Range
Booster
Increases signal gain to make the sound more powerful.
Parameter descriptions
Parameter
name
Position
Sense
Resonance
Level
Depth
Rate
Color
Balance
Time
Curve
Dry Mix
RTM Mode
RTM Sync
Range
Tone
Parameters/Descriptions
Sense Resonance
Rate
Rate Color
Balance
Time Curve
Dry Mix
Tone Level
Setting range
~ ~ ~
Level
Level
Level
Level
Level
Level RTM Mode
Description
Adjusts auto wah sensitivity.
Adjusts resonance intensity.
Adjusts signal level after passing through module.
Adjusts modulation depth.
Adjusts modulation rate. Can be set in rhythm tempo note units.
sizing the effect.
Selects sound type.
Adjusts frequency used for modulation.
Adjusts wah center frequency.
Adjusts balance between original sound and effect sound.
Adjusts rise time for sound.
Adjusts volume rise curve.
Adjusts original sound mix ratio.
Adjusts change range and direction.
Selects control waveform.
Adjusts control wave frequency.
Selects frequency range to boost.
Adjusts tone.
RTM Sync
-
-
116