Dell 2007FP Setting Up page 37

Missing Pixels LCD screen
has spots
Stuck-on Pixels LCD screen
has bright
spots
Brightness Picture too
Problems dim or too
bright
Geometric Screen not
Distortion centered
correctly
Horizontal/Vertical Screen has
Lines one or more
lines
Sync Problems Screen is
scrambled or
appears torn
LCD Scratched Screen has
scratches or
smudges
Safety Related Visible signs
Issues of smoke or
sparks
Intermittent Monitor
Problems malfunctions
on & off
Missing Color Picture
support.dell.com/support/edocs/monitors/2007FP/en/ug/solv e.htm#Monitor Specific Troubleshooting
Cycle power on-off
These are pixels that are permanently off and is a natural defect that occurs in LCD technology
Cycle power on-off
These are pixels that are permanently on and is a natural defect that occurs in LCD technology
Perform monitor reset on "Factory Reset"
Auto Adjust via OSD
Adjust brightness & contrast controls via OSD
NOTE: When using '2: DVI-D', the contrast adjustment is not available.
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust brightness & contrast controls via OSD
Ensure monitor is in proper video mode
NOTE: When using '2: DVI-D', the positioning adjustments are not available.
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check and determine if these lines are also in self-test mode
Check for bent or broken pins
NOTE: When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust Phase and Pixel Clock controls via OSD
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode
Check for bent or broken pins
Boot up in the "safe mode"
Turn monitor off and clean the screen
For cleaning instruction, see
Caring for Your
Do not perform any troubleshooting steps
Monitor needs to be replaced
Ensure monitor is in proper video mode
Ensure video cable connection to computer and to the flat panel is secure
Perform monitor reset on "Factory Reset"
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode
Perform monitor self-test feature check
Monitor.
3/7