Table of Contents
Advertisement
SETTINGS
support.dell.com/support/edocs/monitors/2007FP/en/ug/setup.htm#Connecting Your Monitor
Menu Vertical Position
and
buttons move OSD up and down.
Menu Timer
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
and
Transparency
This function is used to adjust the OSD background from opaque to transparent.
Menu Rotation
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust according to your Display Rotation.
Menu Lock
Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked except the menu
NOTE:
When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-selected on entry. Select
No(-) to unlock and allow user access to all applicable settings.
Factory Reset
Reset all OSD settings to the factory preset values.
DCC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your PC. You
can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Exit Menu
Push
to exit the OSD main menu.
This function brings up a window displaying image from another input source.
PIP
PIP submenu when PIP OFF (main source is VGA/DVI-D input)
PIP submenu when PIP ON (main source is VGA/DVI-D input)
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
PIP submenu when PIP OFF (main source is Video input)
or
PIP submenu when PIP ON (main source is Video input)
button.
11/16
Hide quick links:
Advertisement
Table of Contents
