Table of Contents
Advertisement
3. Push the MENU button once to activate the highlighted option.
4. Push
and
5. Push MENU to enter the slide bar and then use the
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and Submenus
EXIT
BRIGHTNESS
& CONTRAST
AUTO ADJUST
support.dell.com/support/edocs/monitors/2007FP/en/ug/setup.htm#Connecting Your Monitor
button to select the desired parameter.
and
Description
Select to exit the main menu.
This menu is to activate Brightness/Contrast adjustment.
Back
Brightness
Contrast
Push
to select Back to go back to the main menu.
Brightness adjusts the luminance of the backlight.
Push the
button to increase brightness and push the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Exit Menu
Push the
button to increase contrast and push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Push
to exit the OSD main menu.
NOTE:
When using DVI source, the contrast adjustment is not available.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.
NOTE:
In most cases, Auto Adjust produces the best image for your configuration.
NOTE:
AUTO ADJUST option is only available when you are using the analog (VGA) connector.
buttons, according to the indicators on the menu, to make your changes.
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).
5/16
Hide quick links:
Advertisement
Table of Contents
