Dell 2007FP Setting Up page 25

MENU
SETTINGS
support.dell.com/support/edocs/monitors/2007FP/en/ug/setup.htm#Connecting Your Monitor
When making changes to either the 'Horizontal' or 'Vertical' settings, no changes will occur to the size of the viewing area: the image will simply be shifted in
response to your selection/change.
Display Info
Use the and buttons to adjust image to left/right and up/down. Minimum is '0' (-). Maximum is '100' (+).
Display Reset
This feature can make the image look sharper or softer. Use
Exit Menu
Use the Zoom function to zoom in to specific area of interest.
Using the and keys to zoom in and out.
When using the zoom function.
Use the and buttons to adjust image to left/right and up/down. Minimum is '0' (-). Maximum is '100' (+).
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting
'Image Settings'.
Use and
the buttons to adjust
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
To turn on or off Audio Power during Power Save mode.
All the settings related to this monitor.
Reset the image to the original factory setting.
Push to exit the OSD main menu.
Back
Push to select Back to go back to the main menu.
Language Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
Menu Horizontal Position
and buttons move OSD to the left and right.
Menu Vertical Position
or to adjust the sharpness from '0' to '100' .
for best image quality.
10/16