Moving The Machine; Before You Start; Leveling The Machine - Nautilus R514c Assembly Manual

BEfORE YOU START

Moving the Bike
To move the recumbent bike, carefully lift the rear end of the bike and slowly push it to the desired location.
NOTICE: B e careful when you move the bike. Abrupt motions can affect the computer operation.

Leveling the Machine

Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the knob to
adjust the stabilizer foot.
To adjust the leveler on the Frame Rail:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock
the leveler.
Make sure the machine is level and
stable before you exercise.
20
13 mm