Hands-Free Answerback - Panasonic KX-NCP500 Operating Manual

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

To set forwarding status and outside destinations to ring in parallel for outside calls to an
ICD group
PT
While on-hook (when in FWD/DND Setting Mode)
FWD/DND
Press the fixed
FWD/DND button.
To set ringing
FWD–All Calls
1
Enter 1.
Only one extension assigned as member 1 in each ICD group can perform the settings for
virtual PSs.
It is possible to switch the forwarding status (on/off) of a virtual PS by entering the number
(4–7) of that extension, then pressing the fixed FWD/DND button, instead of pressing the
AUTO DIAL/STORE button.

1.3.31 Hands-free Answerback

You can answer an incoming call without going off-hook as soon as the line is connected.
When an intercom call arrives, you will hear the caller talking without the phone ringing. When
an outside call arrives, you will hear the caller talking after a preprogrammed number of rings.
Hands-free Answerback for outside calls requires System Programming.
Document Version 2010-08
Virtual PS 1
4
Virtual PS 2
5
Virtual PS 3
6
Virtual PS 4
7
Enter 4 to 7.
To cancel ringing
FWD off
0
Enter 0.
OR
outside
CO line
phone no.
access no.
(max. 32 digits)
Enter CO line access number
and then outside phone number.
1.3.31 Hands-free Answerback
AUTO DIAL
STORE
Press STORE.
AUTO DIAL
STORE
Press STORE
to set.
A confirmation tone will
be heard.
Operating Manual
89

Advertisement

Table of Contents
loading

Table of Contents