Call Transfer; Transferring To Extension In Pbx - Panasonic KX-NCP500 Operating Manual

To leave the conversation and then let the two parties talk
PT/PS
During a conversation
TRANSFER
C.Tone
Press
TRANSFER.
SLT
During a conversation
OR
C.Tone
Press Recall/
hookswitch.

1.3.11 Call Transfer

–
Transferring to an Extension in the PBX
–
Transferring to an Outside Party Using the PBX Service
•
•
Document Version 2010-08
(DSS)
OR
extension no.
Press DSS or dial the other
party's extension number.
extension no.
Dial the other party's
extension number.
You can transfer a held call without talking, and go on-hook even if the transferred party
does not answer the call.
If a transferred call is not answered within a specified time, it will ring at a
preprogrammed extension, if set, or at your extension again. If you are off-hook at that
time, you will hear an alarm tone. If an outside call is not answered within a specified
time, it is automatically disconnected.
For users of SIP Extensions:
–
Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
–
The transfer operation for SIP Extension users may differ from the steps in this
section, and may vary depending on the type of telephone being used.
TRANSFER
Talk to the Press
other party. TRANSFER.
OR
Talk to the
Press Recall/
other party.
hookswitch.
1.3.11 Call Transfer
On-hook.
On-hook.
Operating Manual 43