Selecting Dual Band Mode/ Single Band Mode; Selecting A Frequency Band - Kenwood TH-D72A Instruction Manual
144/440 mhz fm dual bander; 144/430 mhz fm dual bander
Hide thumbs
Also See for TH-D72A:
- Instruction manual (156 pages) ,
- Service manual (97 pages) ,
- Manual (3 pages)
Table of Contents
Advertisement
SElECTINg duAl BANd mOdE/ SINglE BANd mOdE
You can switch the transceiver between dual band operation and single band
operation.
1 Select your desired band (A or B).
2 Press [DUAL].
•
Each time you press
mode and Dual band mode.
Single band mode (band A only):
SElECTINg A FREQuENCy BANd
You can change the default frequency bands for bands A and B.
1 Select your desired band (A or B).
2 Press [F], [A/B].
•
Each time you press
•
When masking a band, you are restricted to using only the selectable band.
•
When receiving 2 signals on the same band, the image interference, sensitivity,
etc., performance will decrease.
•
Band A: 144 >> 430/440 (MHz).
•
Band B: 118 >> 144 >> 300 >> 430/440 (MHz).
Note: The TH-D72E uses the 430 MHz band and the TH-D72A uses the 440 MHz band.
16
[DUAL]
, the transceiver switches between
[F], [A/B]
, you cycle to the next frequency band.
Dual band mode:
Single band mode (band B only):
Single band
Advertisement
Table of Contents
