4 Replacement Procedures
4.23 Antennas for WLAN
NOTE: The disassembly and assembly of antennas for WLAN and WWAN are the same.
Removing the Antennas for WLAN
Remove the antennas for WLAN according to the following procedures and Figure 4.45.
1. Pull the antennas out from the routing channel on the LCD cover assembly, as indicated
in Figure 4.46.
2. Carefully peel the antennas from the LCD cover assembly.
Figure 4.45 Removing the antennas from the LCD cover assembly
Satellite M600/M640/M645/M647 Maintenance Manual
4.23 Antennas for WLAN
4-62