Vlan Configuration - Redline Communications AN-50e User Manual

# Action
D Save
6.6.3

VLAN Configuration

Use these steps to convert the pass-though settings to be VLAN tagged
connections.
# Action
A Change
Group to
be VLAN
Tagged
B Change all
Connection
s to be
VLAN
Tagged
C Save
Note: If Tagged Management is not configured, you are now unable to access the
web GUI of subscriber stations over the wireless interface. Local access though
the Ethernet port is not affected.
70-00033-01-03
Description
Click Save in the left-hand menu to permanently save all settings.
The system will pass all tagged and untagged data and management
traffic.
Description
1. Click Groups in the left-hand menu to display the Group
Configuration screen.
2. Click Cfg to edit the pass-though group configuration.
3. Set the mode to Tagged in the Group Tagging Mode field.
4. Enter the group VID in the Group VLAN ID field.
5. Click Apply to save and activate these settings.
1. Click Groups in the menu to display the Group Configuration
screen.
2. Click Exp to view all connections for that group.
3. Choose a connection and click
configuration.
4. Set the Connection Tagging Mode to Tagged.
5. Enter the connection VID in the Connection VLAN ID field.
6. Click Apply to save and activate these settings.
7. Repeat steps 1 through 6 for each connection.
Click Save in the left-hand menu to permanently save and activate
all settings. The system will now pass only VLAN tagged traffic.
Proprietary Redline Communications © 2005
Page 98 of 100
AN-50e
user manual
Cfg to edit the connection
September 2005