Specifications - JVC 0105RYMMDWJEIN Instructions Manual

Audio/video control receiver
Table of Contents

Advertisement

Specifications

Amplifier
Output Power
At Stereo operation
At Surround operation
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Audio Input (DIGITAL IN)*
Coaxial
Optical
2
*
Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz,
48 kHz)
Recording Output Level
Signal-to-Noise Ratio ('66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Frequency Response (8 Ω)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Equalization (5 bands)
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:
Video
Video Input Sensitivity/Impedance
Composite video
Video Output Level
Composite video
Synchronization:
Signal-to-Noise Ratio:
Front channels:
Front channels:
Center channel:
Surround channels:
2
DIGITAL 1 (DVD):
DIGITAL 2 (CD):
TAPE/CDR, VCR:
DVD, VCR:
VCR, MONITOR OUT:
per channel, min. RMS, driven into 8 Ω, at 1 kHz with no
100 W*
1
more than 0.8% total harmonic distortion (IEC268-3/DIN).
100 W per channel, min. RMS, driven into 8 Ω, at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω, at 1 kHz with no more than 0.8%
total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω, at 1 kHz with no
more than 0.8% total harmonic distortion.
(*
1
Measured on AC 110 V, 127 V, 220 V, and 240 V)
220 mV/47 kΩ
0.5 V(p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
87 dB/62 dB
20 Hz to 50 kHz (+1 dB, –3 dB)
±8 dB (in 2 dB steps)
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
Negative
45 dB
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1290-007aRx-5052s

Table of Contents