Table of Contents
Advertisement
Basic Settings
Setting for Easy and Effective Surround
Operations
¶ Auto Surround—AUTO SURROUND
Auto Surround works when the unit detects the incoming digital
signal. In other words, it works...
• When you select the digital source (the source with digital
input selected for it), and
• When you change the input mode from analog to digital.
Select "AUTO SURR ON" to activate Auto Surround.
AUTO SURR ON:
• When multi-channel signal is detected, an appropriate
Surround mode will be turned on.
• When Dolby Digital 2-channel with surround signals
is detected, "PLII MOVIE" will be selected.
• When Dolby Digital 2-channel without surround
signals is detected, "SURROUND OFF" will be
selected.
• When Linear PCM signal is detected, nothing will
change.
AUTO SURR OFF: Select to deactivate Auto Surround.
Notes:
• This function does not take effect in the following cases:
– While playing an analog source,
– While selecting any of DSP modes (see page 26), or one of the
fixed digital input mode—"DOLBY DIGITAL" or "DTS
SURROUND" (see page 12), and
– While listening with the headphones—"HEADPHONE" or
"3D H PHONE" (see pages 11 and 24).
• If you select another Surround mode or DSP mode (or deactivate
the Surround/DSP mode) manually, Auto Surround, if in use, will be
canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
– When you turn the receiver off and on,
– When you change the source,
– When you change the analog/digital input, and
– When you select "AUTO SURR ON" again.
20
¶ Virtual Surround Back—VIRTUAL SBACK
You can enjoy the surround back channel while playing back
Dolby Digital Surround EX software or DTS-ES software
without the surround back speakers. This function creates the
great surround effect from the behind as if you have connected
the surround back speakers.
Select "VRTL SB ON" to activate Virtual Surround Back.
VRTL SB ON: While you play Dolby Digital Surround EX
software or DTS-ES software, the VIRTUAL SB
(Surround Back) indicator lights up.
VRTL SB OFF: Select to deactivate Virtual Surround Back.
Notes:
• When you have set "NONE" for "SURR SPEAKERS," this function is
not available.
• While playing back DTS-ES Matrix software with DTS 96/24, DTS
96/24 processing will not be performed with Virtual Surround Back
activated. To apply the processing, deactivate Virtual Surround
Back.
• Virtual Surround Back may not be applied to some software.
• Virtual Surround Back only works for Surround modes (see page
25). This function does not work when activating the DSP mode
(see page 27).
Setting the Digital Input Terminals
When you use the digital input terminals, register which components
you have connected to the digital input terminals.
¶ Digital Input terminal—DIGITAL IN
Set the components connected to the digital terminals.
• As you rotate MULTI JOG, the digital input terminals are set
to used for the following digital components:
" 1DVD 2TV
1DVD 2CD
2DVD " 1CD
1CD
2DVD " 1TV
1TV
1CDR 2DVD " 1CDR 2CD
(back to the beginning)
" 1DVD 2CDR "
" 1CD 2CDR "
2TV
" 1TV 2CDR "
2CD
" 1CDR 2TV
"
Advertisement
Table of Contents
