Table of Contents
Advertisement
Basic Setting Items
On the following pages, you can adjust the following items:
• You can only select the items currently available. For details, see
the explanation of each item.
Items
SUBWOOFER*
Register your subwoofer.
FRNT SPEAKERS* Register your front speaker size.
CNTR SPEAKER*
Register your center speaker size.
SURR SPEAKERS* Register your surround speaker size.
DISTANCE UNIT
Select the measuring unit for the
speaker distance.
FRONT L DIST*
Register the distance from the left front
speaker to your listening point.
FRONT R DIST*
Register the distance from the right front
speaker to your listening point.
CENTER DIST*
Register the distance from the center
speaker to your listening point.
SURR L DIST*
Register the distance from the left
surround speaker to your listening
point.
SURR R DIST*
Register the distance from the right
surround speaker to your listening
point.
SUBWOOFER OUT Select the type of the sounds emitted from
the subwoofer.
CROSSOVER
Select the cutoff frequency to the
subwoofer.
LFE ATTENUATE
Attenuate the bass (LFE) sounds.
MIDNIGHT MODE
Reproduce a powerful sound at night.
DUAL MONO
Select the Dual Mono sound channel.
AUTO SURROUND Turn on or off Auto Surround.
VIRTUAL SBACK
Turn on or off Virtual Surround Back.
DIGITAL IN
Select the component connected to
digital input terminal.
Note:
* These items can be set using Quick Speaker Setup.
To do
See page
Basic Procedure
18
18
18
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
18
canceled before you finish, start from step 1 again.
18
Ex. When setting Auto Surround to "AUTO SURR ON."
18
1 Press SETTING.
The last selected item appears on the display.
18
18
18
2 Turn MULTI JOG until an item you want
appears on the display.
• In this example, select "AUTO SURROUND." For available
18
items, see the list "Basic Setting Items."
18
19
19
3 Press in MULTI JOG (PUSH SET).
19
The current setting for the selected item appears on the display.
19
20
20
20
4 Turn MULTI JOG until a setting you want
appears on the display.
5 Press in MULTI JOG (PUSH SET).
6 Repeat steps 2 to 5 to set other items if necessary.
7 Press EXIT.
The source indication resumes on the display.
Remote
NOT
17
Advertisement
Table of Contents
