Kyocera TASKalfa 265ci Operation Manual page 29

Registering Destinations > Registering Destinations in the Address Book
7
Select transmission settings
The transmission start speed, ECM communication, and encrypted transmission can be set.
1
Press [Detail Settings].
Ready to send.
FAX
Sub Address
0123456789
Pause Space
Cancel
2
Configure the transmission start speed.
Ready to send.
FAX - Detail Settings
TX Start Speed
1
ECM
Encrypted Transmission
Cancel
NOTE
Normally the default setting should be used.
3
Turn on ECM communication.
Ready to send.
FAX - Detail Settings
TX Start Speed
ECM
1
Encrypted Transmission
Cancel
ECM (error correction mode) is a function to automatically resend an image that has not been
correctly sent or received due to the effects of noise on the telephone line during transmission.
4
Turn on encrypted transmission.
Ready to send.
FAX - Detail Settings
TX Start Speed
1
ECM
Encrypted Transmission
Cancel
To use encrypted communication for transmission, turn on encrypted transmission.
For the procedure for turning on encrypted transmission, refer to Encryption on page 6-36.
10:10
Detail Settings
Backspace
OK
10:10
2
33600bps
On
1/1
Off
OK
10:10
2
33600bps
On
1/1
Off
OK
10:10
2
33600bps
On
1/1
Off
OK
2-4
Ready to send.
Detail Settings - TX Start Speed
9600bps
14400bps
33600bps
Cancel
Ready to send.
Detail Settings - ECM
Off
On
Cancel
Ready to send.
Detail Settings - Encrypted Transmission
Encryption
Cancel
10:10
1/1
OK
10:10
1/1
OK
10:10
Off
1/1
OK