Toshiba e-STUDIO 163 Service Handbook page 177

3) Moire/lack of sharpness
Moire
Defective area
Density reproduction
Parameter adjustment
value
Printer section
Lack of sharpness
Defective area
Density reproduction
Parameter adjustment
value
Printer section
December 2005 © TOSHIBA TEC
A
Fig. 5-3
Step Check items
1 Check the reproduction of the image
density.
2 Check the image processing param-
eters.
3 Check test print image (07-113).
Step Check items
1 Check the reproduction of the image
density.
2 Check the image processing param-
eters.
3 Check test print image (07-113).
4 Check the image processing param-
eters.
5 - 21
B
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Check the encircled areas A and B in
the image, and change the sharp-
ness intensity in the sharpness
adjustment mode.
e-STUDIO163/203 TROUBLESHOOTING
5