Toshiba e-studio477s User's Manual And Troubleshooting Manual page 77

Transporting the Machine
Because the machine is precision equipment, it may get
damaged during transportation, depending on the packaging
method. Please transport it via the following procedure.
1
Turn OFF power to the machine.
(1) Press the [ON/OFF] button until a "pip"
sound is heard.
(2) "Shutdown is in progress." appears for a
while, and then the power is turned OFF.
(3) Turn the power switch OFF.
2
Remove the following parts.
• Unplug the power cord and ground wire
• Remove any cables
• Remove any paper from the drawers
3
Insert your finger into the recess on the
right side of the machine and pull the front
cover open lever to open the front cover
forward.
Note
• Open the front cover gently. If you open it rapidly, the
bypass tray may open.
Front Cover
4
Remove the print cartridge and place it on a
flat surface.
Print Cartridge
5
Put the print cartridge into a black bag and
tie the bag closed.
6
Hold the Document holder lever and lift the
Document holder then open the top cover.
Front Cover
• If the inner finisher is installed, be sure to remove any
Open Lever
- 77 -
Moving or Transporting the Machine
Print Cartridge
Document holder
lever
Top cover
Note
output paper on it before opening the top cover.
1
2
3
4
Document
holder
5
6
7