Preparing For Convergence Adjustment - Barco DP-1500 Installation Manual

12. Servicing

12.3.2 Preparing for convergence adjustment

Necessary tools
Flat blade screwdriver 7x150.
How to set up the projector for convergence adjustment?
1. Remove all side covers and top cover of the projector.
2. Open the sealed compartment of the Light Processor. See page 130.
3. Remove the convergence cover plate in the top plate as follow:
a) loosen both captive screws (reference 1).
b) slide the cover plate forward until it becomes free from the top plate.
c) take off the cover plate.
Image 12-7
4. Reinstall the lens and start up the projector.
5. Use the Communicator software to activate the convergence test pattern.
2
5
Image 12-8
106
3
6
1
4
1
R59770091 DP-1500 06/01/2009