Basic Recording; To Pause Recording; To Stop Recording; To Rewind The Tape (When It Is Not Running) - JVC SR-V10U Instructions Manual

Basic
Recording
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
POWER
REC LINK
S VIDEO VIDEO (MONO)L—AUDIO—R
DIGITAL TBC/NR
TV/VCR
1
4
7
1
REW ( 1 )
4
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
1
Load a cassette
Make sure the record safety tab is intact. If not,
set "REC SAFETY" to "OFF" (
You can also record onto a cassette without a
record safety tab by covering the hole with
adhesive tape before inserting the cassette.
JOG dial
PLAY ( 3 )
REW
PLAY
–
A.DUB
24HR QUICK
PROGRAM
SP EP
INSERT
VCR REC
4
PAUSE ( 8 )
STOP/EJECT
( 7 / 0 )
POWER
2 3
2
2
5 6
b
–
8 9
0
4
2
–
3
FF ( ¡ )
PAUSE ( 8 )
STOP ( 7 )
pg. 37, 41).
2
Select recording channel
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
a– Press CH + or –.
b– Press the Number keys.
If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
3
Set tape speed
Press SP/EP to set the recording speed.
FF
4
+
Start recording
CH– /+
PUSH / TURN
On the front panel:
PAUSE STOP/EJECT
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
If "VIDEO CALIBRATION" is set to "ON"
(default setting:
the tape condition for about seven seconds,
then starts recording. This means that the first
seven seconds of the program will not be
recorded. If this is inconvenient for you, follow
the steps below:
1 Press REC ( ¶ ) and PAUSE ( 8 ) to start
2 Then press PLAY ( 3 ) to start recording

To pause recording

Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
Pressing REC ( ¶ ) on the front panel also resumes
recording.
a

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.

To rewind the tape (when it is not running)

Press REW ( 1 ) (or turn the JOG dial on the front
panel to the left).

To fast-forward the tape (when it is not running)

Press FF ( ¡ ) (or turn the JOG dial on the front panel
to the right).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
or
pg. 37, 38), this VCR checks
Video Calibration.
after Video Calibration is complete.
19
EN