Setting Clock Manually; Manual Clock Set - JVC SR-V10U Instructions Manual

12
EN
1
4
7
1
8

Setting clock manually

— Manual Clock Set

First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
Press SHUTTLE PLUS
%fi until the desired
time appears, then press
OK or SHUTTLE PLUS
#.
Holding SHUTTLE PLUS %fi changes the time
in 30-minute intervals.
When the time is entered manually, "AUTO
CLOCK" is automatically set to "OFF", and
"HOST CH" and "TIME ZONE" disappear.
2 3
2
5 6
8 9
0
4
4 – 7
4 – 7
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
5
Set date
Press SHUTTLE PLUS %fi until the desired date
appears, then press OK or SHUTTLE PLUS #.
Holding SHUTTLE PLUS %fi changes the date
in 15-day intervals.
6
Set year
Press SHUTTLE PLUS %fi until the desired year
appears, then press OK or SHUTTLE PLUS # twice.
7
Select D.S.T. mode
You can select either "ON" or "OFF".
ON–
OFF– Select when Daylight Saving Time does
Press SHUTTLE PLUS %fi to select the desired
setting.
8
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or SHUTTLE PLUS # repeatedly until the item
you want to change blinks, then press SHUTTLE PLUS
%fi.
02
INITIAL SETTINGS (cont.)
Adjustment will be made by the built-in
clock itself.
not apply to you.