Yamaha YSP-1 Owner's Manual page 14

Eo,Io]_E;follg.'f*_Y_lDJ._El_[_lf[o1_I_
This section describes the function of each control on the
remote control used to control this system. To operate
other components, see "Controlling other components" on
page 52.
@
O Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
O STANDBY/ON
Sets this system in the standby mode (see page 19).
• Numeric buttons
Use to enter numbers.
O NIGHT
Turns on or off the night listening modes (see page 33).
• SURROUND
Selects the surround mode for playback (see page 32).
O Cursor buttons _/_/_/[_SELECT
Use to select and adjust SET MENU items.
O TEST
Outputs a test tone when adjusting the speaker levels
(see page 48).
O MUTE
Mutes the sound (see page 30). Press again to restore the
audio output to the previous volume level.
O SLEEP
Sets the sleep timer (see page 50).
@ Beam mode buttons
Change the beam mode settings (see page 34).
• CODE SET
Use to set up remote control codes (see page 51 ).
• SET MENU
Displays the SET MENU on your TV or monitor
(see page 24).
@
RETURN
Use to select sleep timer settings (see page 50) or return to
the previous SET MENU screen (see page 24).
O VOLUME +/-
Increases or decreases this system's volume level
(see page 30).
O Input selector buttons
Use to select a playback source and change the control
area (see page 31 ).
8