Hotel Mode Menu List - Panasonic TH-37LRT12U Service Manual

TH-32LRT12U-A * TH-37LRT12U/M/A
6.2.2.

Hotel mode menu list

Item
Off
Adjusts the input signal when the unit is turned on.
Off: The input signal when the power was last turned off is set.
Initial Input
Note:
This menu is available only when "Input Lock" is "Off".
RF mode is available only when Pal Tuner is connected.
Off: Onscreen information is not displayed.
On: Onscreen information is displayed, such as:
Onscreen Display
On 1: Onscreen information is displayed, except some RS-232C communication information is not
Used to set the volume level at power-on.
Off: The volume is set to the same level as when the power was last turned off.
0 to 63: The volume is set to the selected level.
Initial VOL Level
Note:
It is not possible to select an Initial VOL Level setting which is higher than the Maximum VOL Level setting.
Used to set the volume level so that it will not exced the maximum setting.
Off: No restrictions are placed on the volume level.
Maximum VOL
0 to 63: The volume is restricted to the selected level.
Level
Note:
It is not possible to select a Maximum VOL Level setting which is lower than the Initial VOL Level setting.
Off
Locks the input switch operation.
Off: Input switch can be used.
Input Lock
Note:
RF mode is available only when Pal Tuner is connected.
Used to restrict the operation of the buttons on the main unit.
Off: All the buttons on main unit can be used.
Button Lock
Menu: Locks the Menu button on the main unit.
On: Locks all the buttons on the main unit except the Power button.
Off
Off:
User1:You can only use
Remocon User
User2:You can only use
Level
User3:Locks all the buttons on remote control.
Note: Hotel Mode menu may not be accessible when you select "User2" or "User3". When this happens,
press the VOL- on the display and the OK button on the remote control at the same time. The message
"Are you sure to out the mode?" will appear, select "Yes".
RF AV1 AV2 AV3
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer
displayed.
RF AV1 AV2 AV3
User1 User2
You can use all of the buttons on the remote control.
, ,
INPUT
POWER
button on the remote control.
POWER
Details
YPbPr HDMI1
YPbPr HDMI1
User3
, MUTE , buttons on the remote control.
VOL
16
HDMI2 HDMI3 PC
HDMI2 HDMI3 PC