Using The Sleep Timer - JVC Micro Component System UX-S10 Instructions Manual

Consists of ca-uxs10 and sp-uxs10
Hide thumbs Also See for Micro Component System UX-S10:
Table of Contents

Advertisement

To deactivate the timer temporarily, press
TIMER ON/OFF until the
goes off.
To activate and change the timer, repeat steps 1 to 7 on
page 20.
• To activate the timer again without changing
the setting, press TIMER ON/OFF until the
(timer) indicator lights up on the display.
If the unit is already turned on when the timer on-time
comes
The timer does not work.
When no disc is set for the Daily Timer playback
The source will automatically change from CD to the last station
you tuned in to, and start playing when the on-time comes.
When you unplug the AC power cord or if a power
failure occurs
The timer will be canceled. You need to set the clock first, then set
the timer again.
21
TIMER
ON/OFF
(timer) indicator
TIMER
ON/OFF

Using the Sleep Timer

With the Sleep Timer, you can fall asleep to your favorite
music or radio program.
• You can set the Sleep Timer only when the unit is turned
on.
How the Sleep Timer actually works
The unit automatically turns off after the specified length of
time passes.
On the remote control ONLY:
1
Press SLEEP.
The SLEEP indicator lights up on the display.
• Each time you press the button, the length of time
changes as follows:
90
80
10
OFF
2
Wait for about 5 seconds after specifying the
length of time.
To check the remaining time until shut-off time, press
SLEEP once. The remaining time until shut-off time appears
for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the length of time you want appears.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears and the SLEEP indicator goes off on the display.
• Turning off the unit also cancels the Sleep Timer.
When you set the Sleep Timer after the Daily Timer
starts playing the selected source
The unit turns off with either timer having an earlier shut-off time.
If you set the Sleep Timer while playing back or
recording a tape
Do not shut the unit off with the Sleep Timer while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.
SLEEP
70
60
50
20
30
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-s10bUx-s10Ca-uxs10Sp-uxs10

Table of Contents