Table of Contents
Advertisement
While playing back an MP3 disc
ID3 Tag information (the name of the title, artist, and album up to 30
characters) will be shown on the display. When the name is too long
to be displayed at once, it is scrolled.
This unit supports ID3 Tag ver. 1.1 and 2.0.
To stop playing, press 7.
To remove the disc, press 0 OPEN on the unit.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no disc is inserted
"NO DISC" appears on the display.
DO NOT try to open the disc cover by hand as it
will be damaged.
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press ¢ or
4 repeatedly.
• ¢ : Skips to the beginning of the
next or succeeding tracks.
• 4 : Goes back to the beginning of the current or previous
tracks.
When playing back MP3 disc:
•
: Skips to the first track of the next group.
•
: Skips to the first track of previous group.
To locate a particular point in a track
During play, press and hold ¢ or
4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
• You cannot use this function when playing back an MP3
disc.
15
Programming the Track Playing Order—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 60 tracks.
On the remote control ONLY:
1
Place a disc.
• If the current source is not the CD player, press CD.
2
Press PROGRAM.
The PRGM (program) indicator starts flashing
on the display.
audio CD:
Program step
number
3
Select the track you want to
program.
1) (MP3 disc only)
Press
select the group.
2) Press ¢ or 4 repeatedly to
select the track, then press PROGRAM.
CD
"P XX OK" (XX: the program step number)
appears on the display for a while.
4
Repeat step 3 to program other tracks you
want.
5
Press CD 3/8.
The tracks are played in the order you have programed.
If you try to program a 61st track
"PRG FULL" will appear on the display.
To stop playing, press 7.
To check the program contents
Press ¢ or 4 repeatedly in stop
mode.
The program number and track number
are displayed in succession.
MP3 disc:
Group number Track number
Track number
or
repeatedly to
PROGRAM
PROGRAM
CD
Advertisement
Table of Contents
