Security Features Controlled By The Phone; Setting Up The Admin Code; Setting Up The User Code - Inmarsat IsatPhone 2 Use Manual

Click to navigate
2 Welcome
3 Safety
6 Quick reference
9 Getting started
13 Using your IsatPhone 2
34 Location services
40 Phonebook & Contacts
44 Data
45 Personal settings
52 Security
52 Security locks and codes
53 Security features controlled by the phone
54 Security features controlled
by the SIM card
54 Security features controlled
by the network
55 Troubleshooting
58 Care and maintenance
60 Regulatory and compliance
63 Disclaimer
64 Accessories
65 Export controls
66 Malware
67 Downloading content
68 Notices
69 Protection of personal information
70 Type and specification
71 Index
53
Security can be controlled by the phone, the SIM card
or the Inmarsat network. This enables you to match
security requirements to your needs. The keypad lock
prevents accidental dialling; the phone lock prevents
an unauthorised user from using your phone even if
they replace the SIM card. The SIM PIN prevents an
unauthorised user from using your SIM even if they place
it in another phone. The admin code restricts access to
particular features on the phone. For example, an individual
might only wish to activate the keypad lock.
A corporate organisation might choose to restrict
functions available to their employees by activating
the admin code and issuing a user code.
Security features controlled
by the phone
Access to your phone can be restricted by the keypad
lock to prevent accidental dialling (see Setting up keypad
lock on page 49 for more information) or by activation
of the admin code.
The admin code can be activated: to create a Phone
lock; restrict access to Bluetooth lock, Personal alert
lock and Reset settings; and to create a User code so
that a third party can use the phone but not have access
to the restricted features. See Setting up Bluetooth
lock on page 49 and Reset all settings on page 51 for more
information.
Setting up the admin code
Select Menu > Settings > Security and select Admin
code. You will be prompted for the current code. The
default setting is 123456. When this is accepted, you
will be prompted to enter your new code and then
confirm it. The code must be 6 digits long. If you lose
your admin code, contact your service provider. The
default setting is off.
The admin code can be entered incorrectly an unlimited
number of times. If you have forgotten your code, contact
your service provider.
Setting up the user code
Select Menu > Settings > Security and select User
code. You will be prompted to enter the 6-digit Admin
code. Once this is accepted, you will be prompted to
create a new user code and to confirm it. The code can
be 4-6 digits in length. The default setting is off. The user
code can be entered incorrectly an unlimited number
of times. If you have forgotten your code, contact your
phone's administrator.