Setting The Time Zone; Customising Display Settings; Setting Daylight Saving Time (Dst) - Inmarsat IsatPhone 2 Use Manual

Click to navigate
2 Welcome
3 Safety
6 Quick reference
9 Getting started
13 Using your IsatPhone 2
34 Location services
40 Phonebook & Contacts
44 Data
45 Personal settings
45 Sounds, Ringtones and Profiles
46 Setting phone language
47 Setting date and time
48 Setting the time zone
48 Customising display settings
49 Setting up keypad lock
49 Setting up phone lock
49 Bluetooth
50 Operating a Closed User Group (CUG)
51 Reset all settings
52 Security
55 Troubleshooting
58 Care and maintenance
60 Regulatory and compliance
63 Disclaimer
64 Accessories
65 Export controls
66 Malware
67 Downloading content
68 Notices
69 Protection of personal information
70 Type and specification
71 Index
48
Setting the time zone
You may wish to change the local time zone on your
phone if you move to a new location or if your new phone
is not displaying the correct time zone. You may also wish
to know the time in another location, eg. your head office.
Setting the local time zone
Select Menu > Extras > World time. The world time map
appears. Select Options > Select > Local time zone. Use
the navigation keys to highlight the required time zone
and press Select.
Setting the remote time zone
Select Menu > Extras > World time. Select Options >
Select remote time zone. Use the navigation keys to
highlight the required time zone and press Select.
Setting daylight saving time (DST)
Select Menu > Extras > World time. Select Options and
select from a list to enable/disable local/remote DST. DST
is displayed as 0 or +1 on the world map.
Customising display settings
Lighting the keypad and screen
The backlights for the screen and keypad can be
controlled by going to select Menu > Settings > Display.
Select any one of the following options and press Select
to save your changes.
• Brightness – to set the brightness of the screen
• Screen light – to set the duration for screen backlights
• Keypad light – to set the duration for keypad backlight
• Screen standby – to set the duration for the screen
backlights after the last keystroke