Playing Back Discs; To Set A Disc; Basic Disc Operations - JVC CA-UXNB7DAB Instructions Manual

Playing Back Discs

This System can play back the following discs—regular CD and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
• When playing back the MP3 track, MP3 indicator appears on the display.

To Set a Disc

1
On the System
The disc cover on
the System opens.

Basic Disc Operations

To
Playback the disc
Stop playback
Select a track
Select a group (MP3
only)
Forward search /
Reverse search
NOTES
• If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is loaded,
playback will not start.
• If no disc is inserted, "NO DISC" appears on the main display.
7
2
Place a disc correctly with its label side up,
then press down on the portions around
the disc's center hole until you hear a click.
• When removing the disc, take out the disc
by holding it at the edge with pressing the
System's pivot lightly.
On the On the
System remote
—
—
—
—
Press
Current track number and elapsed playing time appear on the
main display.
• During playback, press again to stop playing for a moment.
• While playback is stopped, total track number and total playing
time (for MP3 disc, group number and track number) appear on
the main display.
Increases the track numbers.
Decreases the track numbers.
Increases the group numbers while playback is stopped.
Decreases the group numbers while playback is stopped.
Fast-forwards the track by pressing briefl y.
To stop searching, press 6.
Fast-reverses the track by pressing briefl y.
To stop searching, press 6.
3
On the System
The disc cover on
the System closes.
• Do not close
forcibly the disc
cover with the
hand.