Table of Contents
Advertisement
South Bridge Configuration
South Bridge Chipset Configuration
USB Functions
USB 2.0 Controller
GbE Controller
GbE LAN Boot
GbE Wake Up From S5
HDA Controller
PCIE Ports Configuration
PCIE Port 0
PCIE Port 1
PCIE Port 2
PCIE Port 3
PCIE Port 4
PCIE Port0-4 Configuration
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
USB Functions
Selects the number of USB ports you want enabled.
USB 2.0 Controller
This field is used to enable or disable USB 2.0
GbE Controller
Enables or disables the GbE controller.
GbE LAN Boot
Enable this field if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM's settings, type the <Shift> and <F10> keys simultaneous-
ly when prompted during boot-up. Take note: you will be able to access the boot
ROM's program (by typing <Shift> + <F10>) only when this field is enabled.
GbE Wake Up From S5
When enabled, it allows the system to wake up from S5 via the network LAN.
HDA Controller
Enables or disables the HDA controller.
PCIE Ports Configuration
Enables or disables the PCIE ports
BIOS SETUP UTILITY
[8 USB Ports]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[4 x1s]
BIOS Setup
Chipset
Options
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
Select Screen
←
Select Item
↑↓
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
3
55
Advertisement
Table of Contents
