Jumper Settings; Clear Cmos Data - DFI-ITOX LR905-B User Manual

Jumper Settings

Clear CMOS Data

3
2
1
2-3 On:
1-2 On: Normal
Clear CMOS Data
(default)
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set pins 2 and 3 to On. Wait for a few seconds and set the jumper back to
its default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
3
2
JP1
1
Hardware Installation
2
17