Operating Features - Kenwood TK-8100H Service Manual

TK-8100H
1. Controls and Functions
1-1. Front Panel
q w e
y t
1-2. Microphone
i
q
(Power) switch
Press to switch the transceiver ON. Press and hold for
approximately 1 second to switch the transceiver OFF.
w VOL
/ keys (left side)
Press to increase or decrease the volume level.
e Display
Refer to right.
r CH
/ keys (right side)
Press to increase or decrease the channel number.
t MON / SCN /
/
PF (Programmable Function) keys. Press each key to acti-
vate its programmable function.
y Microphone jack
Insert the microphone plug into this jack.
u Speaker
Internal speaker.
i PTT switch
Press this switch, then speak into the microphone to call a
station.
4

OPERATING FEATURES

r u
keys
1-3. Display
Indicator
Appears while transmitting.
Appears when trunking is activated.
Appears while monitoring the selected channel
(squelch is off).
Appears when making a call using Code
Squelch or Selective Call. Appears and blinks
when receiving a Code Squelch call.
Appears while scanning.
Appears when the AUX port has been
activated or when the Scrambler function has
been selected.
Appears while using the Talk Around function.
The selected channel is set as a Priority
channel.
The selected channel is added to the scanning
sequence.
Appears when a signal is detected on the
currently selected channel.
Appears when the transceiver keys have been
locked, using the Key Lock function.
Displays the currently selected group and
channel number, or the channel name.
1-4. Rear Panel
Antenna
connector
Description
External
speaker
jack
Power input
connector