4 Replacement Procedures
4.11 Speaker
Removing the speaker
To remove the speaker, follow the steps below and refer to figures 4-22.
1. Pull out the speaker from the slot of cover assembly.
2. Peeling off the insulators, pull out the speaker cables from the guide of cover assembly.
Insulator
Speaker
Installing the speaker
To install the speaker, follow the steps below and refer to figures 4-22.
1. Install the speaker to the slot of cover assembly.
2. Arrange the speaker cable along the guide and secure them with insulators.
PORTEGE M300 Maintenance Manual (960-504)
Figure 4-22 Removing the speaker
Insulator
4.11 Speaker
Speaker
4-35