Toshiba PORTEGE M300 Maintenance Manual page 220

3.32 SETUP
Set the parameters for the Auto Power On (automatic power on) function in the
"OPTIONS" window. To set the time, use Space or BackSpace. Press ? to
move the cursor to the right and ? to move the cursor to the left when you set the
date and time.
For the Alarm Time, set the time to turn on the power automatically. The "second"
cannot be set. When it is set to "Disabled", the time to turn on automatically is not
set.
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to "Disabled", the time to turn on automatically is not set.
The Ring Indicator is displayed only when the computer is in Resume mode and
this function cannot be used for a PC card-type modem. When any modem is not
installed, it is not displayed.
The Wake-up on LAN is a function to turn on the power automatically by the call
from the administrator. It can be set to "Enabled" only when "Built-in LAN" is set
to "Enabled". To activate this function, use the AC adapter.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Panel Power On/Off
This option is displayed only in the resume mode.
Enabled
Disabled
(g) Performance/Battery Life Setting
Use this option to choose a setting of Memory Bus Clock and Graphics Core
Clock from the followings.
Performance
3-104
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
Initial setting. (Default)
PORTEGE M300 Maintenance Manual (960-504)
3 Tests and Diagnostics